Sinleader Double Motor Diaphragm Water Pump

Buy Sinleader Double Motor Diaphragm Water Pump EM-9492. Features 12V DC operation, 10–12 LPM open flow and pressure specifications for water transfer.

The Sinleader Double Motor Diaphragm Water Pump is a 12V DC electric water pump designed for water transfer and pressurised liquid pumping applications. It features a diaphragm pump system and is identified by model number EM-9492.

Operating on a nominal 12V DC power supply, this pump has an open flow rate of 10–12 litres per minute. Its listed pressure specifications include 250 PSI and a 130 PSI pressure rating with an 8.9 bar cutoff specification.

The pump is suitable for users who require a compact DC-powered pumping system for compatible water applications. It can be considered for agricultural and other water transfer requirements where its voltage, flow rate and pressure specifications match the intended application.

Main Features

• Double Motor Design: Features a double motor configuration.

• Diaphragm Pump System: Uses diaphragm-based pumping technology.

• 12V DC Operation: Designed for a nominal 12V DC power supply.

• Open Flow Rate: Provides a specified open flow rate of 10–12 LPM.

• High-Pressure Specification: Listed with a pressure specification of 250 PSI.

• 130 PSI Pressure Rating: Also includes a 130 PSI pressure specification.

• 8.9 Bar Cutoff: Features a listed pressure cutoff specification of 8.9 bar.

• DC Power Supply: Operates within a specified voltage range of 9–14.4V DC.

• Current Requirement: Electrical current specifications are listed as 4–7A and 6–8A.

Technical Specifications

Note: The supplied specifications include two different pressure and current ratings. These have been listed separately rather than treating them as interchangeable values. Confirm the applicable operating conditions with the manufacturer before use.

Where Can You Use It?

The Sinleader Double Motor Diaphragm Water Pump can be considered for compatible water pumping and transfer applications.

Potential applications include:

• Agricultural Water Transfer: Moving water in suitable agricultural setups.

• Small Irrigation Systems: Supporting compatible low-volume irrigation arrangements.

• Water Transfer Applications: Transferring water between suitable containers or tanks.

• DC-Powered Pumping Systems: Applications requiring a 12V DC water pump.

• Equipment-Based Water Supply: Integration into compatible equipment requiring pressurised water delivery.

Actual suitability depends on the required pressure, flow rate, liquid type and installation arrangement.

How to Use the Product

Follow the manufacturer's instructions for installation and operation.

1. Prepare the Pump: Place the pump in a suitable, stable and dry location.

2. Check the Power Supply: Ensure the DC power source operates within the specified 9–14.4V range.

3. Check Electrical Connections: Make sure the wiring and connections are suitable for the pump's current requirements.

4. Connect the Water Lines: Connect the inlet and outlet lines using compatible fittings.

5. Inspect the Connections: Check that the connections are secure and suitable for the intended operating pressure.

6. Start the Pump: Operate the pump according to the manufacturer's instructions.

7. Monitor Operation: Observe the water flow and check for leaks or unusual operating conditions.

8. Switch Off After Use: Disconnect the power supply when pumping is complete or when the pump is not required.

Do not operate the pump outside its specified operating conditions.

Important Safety Precautions

Follow these safety precautions before and during operation:

• Do not pump flammable fluids.

• Do not use the pump in an explosive environment.

• Use only a compatible DC power supply.

• Check electrical connections before starting the pump.

• Keep electrical connections protected from water and moisture.

• Do not operate the pump if its wiring or housing is visibly damaged.

• Ensure the connected hoses and fittings are suitable for the operating pressure.

• Avoid operating the pump outside its specified voltage range.

• Switch off and disconnect the electrical supply before inspection or maintenance.

• Keep children and unauthorised persons away from the operating equipment.

• Follow the manufacturer's operating and installation instructions.

Maintenance and Care

Regular inspection and proper care can help maintain the pump's operating condition.

• Check Electrical Connections: Inspect the wiring and terminals for loose connections or visible damage.

• Inspect Water Connections: Check inlet and outlet fittings for leaks.

• Check Hoses: Inspect connected hoses for cracks, damage or blockages.

• Keep the Pump Clean: Keep the external pump housing clean and free from accumulated dirt.

• Check Pump Operation: Pay attention to unusual noise, vibration or changes in water flow.

• Inspect Regularly: Check the pump for visible wear or damage.

• Proper Storage: Store the pump in a clean, dry location when not in use.

Disconnect the electrical supply before carrying out any maintenance. Follow the manufacturer's instructions for internal servicing and cleaning.

Why Use the Sinleader Double Motor Diaphragm Water Pump?

The Sinleader Double Motor Diaphragm Water Pump is designed for users who need a DC-powered water pumping system. Its 12V nominal operating voltage makes it suitable for applications where a compatible low-voltage electrical supply is available.

The specified open flow rate of 10–12 litres per minute provides useful information when selecting a pump for water transfer requirements. Its diaphragm pumping design and listed pressure specifications also make it worth considering for compatible pressurised water applications.

Before purchasing, customers should check the required operating pressure, flow rate, electrical supply and installation requirements. This helps ensure the pump is suitable for the intended setup and working conditions.

Frequently Asked Questions (FAQs)

Q1. What is the model number of this water pump?

The model number is EM-9492.

Q2. What voltage does the Sinleader Double Motor Diaphragm Water Pump require?

It has a nominal operating voltage of 12V DC, with a specified voltage range of 9–14.4V DC.

Q3. What is the flow rate of this pump?

The specified open flow rate is 10–12 litres per minute (LPM).

Q4. What is the pressure rating of this pump?

The supplied specifications mention 250 PSI and an additional 130 PSI pressure rating with an 8.9 bar cutoff specification. These ratings should be confirmed with the manufacturer for the intended operating conditions.

Q5. What is the current requirement of the pump?

The supplied information lists current specifications of 6–8A and 4–7A. The applicable rating should be confirmed with the manufacturer.

Q6. Is this pump suitable for agricultural applications?

It can be considered for compatible agricultural water transfer and pumping applications, provided the required flow rate, pressure and electrical supply match its specifications.

Q7. Can this pump be used for flammable liquids?

No. The manufacturer specifically warns against pumping flammable fluids.

Q8. Can this pump be operated in an explosive environment?

No. The pump must not be used in an explosive environment.

Final Product Summary

The Sinleader Double Motor Diaphragm Water Pump (EM-9492) is a 12V DC electric diaphragm pump designed for compatible water pumping and transfer applications. It operates at a nominal 12V, with a specified voltage range of 9–14.4V DC and an open flow rate of 10–12 LPM. Its supplied pressure specifications include 250 PSI and a 130 PSI rating with an 8.9 bar cutoff specification. It can be considered for suitable agricultural and general water transfer setups. Before purchasing, check the electrical and pressure requirements of your application to ensure compatibility. Contact Soby Agro for product availability and further details.